Interactive studio

Adjust an Image — live workspace

Fine-tune brightness, contrast, saturation, and warmth on any image layer with live sliders. Every control below is live: configure, run, and watch the results.

Live workspace Ready

Try it: adjust an image

No output yet.
Configure the controls above, then press Run — your result appears here.

Onboarding checklist

  1. Pick a design, then choose an image layer from its layer list.
  2. The four sliders snap to that layer's stored values (or 0 for a fresh layer), shown beside each label.
  3. Drag the sliders — the numeric readout updates live so you can note exact values.
  4. Click Apply adjustments . The live preview re-renders with your changes.

Steps tick themselves off as you work — or tap any step to toggle it.

Adjust an Image techniques

Camera with photographer equipment — Dial in exposure before you export
Dial in exposure before you export
Abstract purple shapes and shadows design — Color grades with a cinematic feel
Color grades with a cinematic feel
Tablet displaying front page of walls io website — Rescue flat photos in a single pass
Rescue flat photos in a single pass
Black and white photo of a neon sign — Match every image to your palette
Match every image to your palette

Good design often comes down to the last ten percent — an image that's a touch too dark, colors that need more punch, or a photo that feels cold next to warm brand colors. The Adjust Image tool gives you four precise sliders — brightness, contrast, saturation, and warmth — for any image layer in your design, each running from −100 to +100 with 0 as neutral.

Adjustments are stored as parameters on the layer, not baked into pixels, so they're fully non-destructive: come back later and change your mind, or reset everything to neutral with one click. Every change is saved instantly to your browser's local storage, so your settings travel with the design.

The values you set here are the same ones the photoaicompany renderer uses when you export — what you see in the live preview is exactly what lands in your PNG, JPG, or SVG file.

How it works

  1. Pick a design, then choose an image layer from its layer list.
  2. The four sliders snap to that layer's stored values (or 0 for a fresh layer), shown beside each label.
  3. Drag the sliders — the numeric readout updates live so you can note exact values.
  4. Click Apply adjustments. The live preview re-renders with your changes.
  5. Made a mess? Reset zeroes every slider and applies neutral settings in one click.

Tips

  • One-click Auto-enhance applies a balanced grade (brightness +8, contrast +18, saturation +12, warmth +2) — a solid starting point before fine-tuning the sliders.
  • Small moves win: most photos look best with brightness and contrast between −15 and +15.
  • Warmth shifts the white balance toward golden (+ values) or cooler blue tones (− values) — handy for matching photos to brand colors.
  • Drop saturation to −100 for true black-and-white without leaving the tool.
  • Stack this with the photo-filter tool: filters apply underneath, and these adjustments refine on top.

What it costs

Free on this site — and it can't be metered. Adjust an Image uses no AI and runs entirely in your browser: no usage counters, nothing sent to our servers to bill. When credit metering arrives in the app, local operations like this one will never consume AI credits — only server-side AI generations will.

Frequently asked questions

Are these adjustments destructive?

No. photoaicompany stores your settings as numbers on the image layer — the original image is untouched, and you can change or reset the values any time before or after exporting.

Do adjustments affect exports?

Yes. The renderer applies your brightness, contrast, saturation, and warmth settings when exporting PNG, JPG, and PDF, so the live preview is a true representation of the final file.

What does warmth do that saturation doesn't?

Saturation changes color intensity overall; warmth shifts the color balance — positive values add golden warmth, negative values cool the image toward blue. Together they handle most color-correction work.

Related style tools

See the transformation

Adjust an Image — before & after

Photo of person painting on white paper — before Adjust an Image
Doing business using a laptop — after Adjust an Image
BeforeAfter photoaicompany

Drag the handle — it glides with physics when you let go. Adjust an Image, transformed in one pass.

Watch it work

See Adjust an Image in motion

Drag the cards, scroll the scene — the tool explains itself.

InputTransformOutput
Futuristic desk with glass top in room — Adjust an Image motion card

A canvas that keeps upAdjust an Image — frame 1 of 4

Vibrant abstract art with dynamic flow — Adjust an Image motion card

Type that performsAdjust an Image — frame 2 of 4

Man making presentation in office — Adjust an Image motion card

Photos with presenceAdjust an Image — frame 3 of 4

Confident woman posing in outdoors setting — Adjust an Image motion card

Export without fearAdjust an Image — frame 4 of 4

Drag the cards — they glide with inertia. Scroll — the blob morphs and the dot traces the flow.

The full walkthrough

How Adjust an Image works, step by step

Fine-tune brightness, contrast, saturation, and warmth on any image layer with live sliders from -100 to 100. Non-destructive, free in your browser.

1

Design

Duplicate before experimenting: the original stays safe while the copy takes risks. Archive finished designs instead of deleting — old work becomes tomorrow’s template.

Pro tip: Star the designs you’ll revisit weekly.

Adjust an Image — untitled.pacCanvas
BackgroundTemplatesZoomProjectsFrames
Art class with instructor and students in studio — Adjust an Image annotated figure
Filters
Rulers
Fill
Rotate
Step 1: Design — Adjust an Image, annotated
  1. 1
    Design control This is where you set design — changes preview live on the canvas.
  2. 2
    Live canvas Every adjustment renders instantly — what you see is what exports.
  3. 3
    Result Happy with it? The design updates in place, ready for the next step.
2

Image layer

Your imagery is your unfair advantage — nobody else has your photos. Lead with them. Compress uploads before adding them if they came straight from a camera; huge files slow the canvas.

Pro tip: Name uploads descriptively — future-you will thank present-you in the layers panel.

Assorted colors of paint tubes — Adjust an Image annotated figure
Adjust an Image
ProjecIconsHistorCrop
Step 2: Image layer — Adjust an Image, annotated
  1. 1
    Image layer control This is where you set image layer — changes preview live on the canvas.
  2. 2
    Live canvas Every adjustment renders instantly — what you see is what exports.
  3. 3
    Result Happy with it? The design updates in place, ready for the next step.
3

Brightness 0

Think of this control as seasoning: essential in the right amount, ruinous in excess. Start subtle. The default value is a sensible starting point chosen for the most common case — depart from it deliberately.

Pro tip: If a control’s effect mystifies you, push it to both extremes — the middle will make sense after.

Adjust an Image — untitled.pacColors
AlignHistoryFlipCanvasIcons
A person holding a camera in their hand — Adjust an Image annotated figure
Brand kit
Frames
Templates
Stroke
Step 3: Brightness 0 — Adjust an Image, annotated
  1. 1
    Brightness 0 control This is where you set brightness 0 — changes preview live on the canvas.
  2. 2
    Live canvas Every adjustment renders instantly — what you see is what exports.
  3. 3
    Result Happy with it? The design updates in place, ready for the next step.
4

Contrast 0

This control fine-tunes the result. Small adjustments here compound — nudge, preview, and trust your eyes over the numbers. Every control in this tool is live: change it and watch the canvas answer immediately.

Pro tip: If a control’s effect mystifies you, push it to both extremes — the middle will make sense after.

photoai.company/share
Vibrant artist s palette mixing colors for painting — Adjust an Image annotated figure
Adjust an ImageIcons · Effects
Templates
Version
Background
Step 4: Contrast 0 — Adjust an Image, annotated
  1. 1
    Contrast 0 control This is where you set contrast 0 — changes preview live on the canvas.
  2. 2
    Live canvas Every adjustment renders instantly — what you see is what exports.
  3. 3
    Result Happy with it? The design updates in place, ready for the next step.
5

Saturation 0

This control fine-tunes the result. Small adjustments here compound — nudge, preview, and trust your eyes over the numbers. Every control in this tool is live: change it and watch the canvas answer immediately.

Pro tip: If a control’s effect mystifies you, push it to both extremes — the middle will make sense after.

Cameras on a wooden surface — Adjust an Image annotated figure
Masks — Adjust an Image
PNGJPGPDFMP4
CanvasShadow
Step 5: Saturation 0 — Adjust an Image, annotated
  1. 1
    Saturation 0 control This is where you set saturation 0 — changes preview live on the canvas.
  2. 2
    Live canvas Every adjustment renders instantly — what you see is what exports.
  3. 3
    Result Happy with it? The design updates in place, ready for the next step.
6

Warmth 0

Think of this control as seasoning: essential in the right amount, ruinous in excess. Start subtle. The default value is a sensible starting point chosen for the most common case — depart from it deliberately.

Pro tip: If a control’s effect mystifies you, push it to both extremes — the middle will make sense after.

Group of people having a meeting — Adjust an Image annotated figure
Adjust an Image
MasksResizeAlignAdjust
Step 6: Warmth 0 — Adjust an Image, annotated
  1. 1
    Warmth 0 control This is where you set warmth 0 — changes preview live on the canvas.
  2. 2
    Live canvas Every adjustment renders instantly — what you see is what exports.
  3. 3
    Result Happy with it? The design updates in place, ready for the next step.
Know your workspace

Anatomy of the Adjust an Image workspace

Five regions do all the work. Learn them once and every tool on this site feels familiar.

Adjust an Image — untitled.pacOpacity
ShadowGradientStylesTemplatesFilters
Close up photo of an abstract painting — Adjust an Image annotated figure
Share
Text
Layers
Assets
Anatomy of the Adjust an Image workspace
  1. 1
    Toolbar Every tool lives here — pick one and the canvas listens.
  2. 2
    Canvas Your design, live. Drag, resize, and edit directly.
  3. 3
    Layers The stack your design is built from — top wins.
  4. 4
    Export One click sends the finished design out as PNG, JPG, or PDF.
  5. 5
    Properties Fine-tune whatever is selected, right where you work.
Level up

Adjust an Image techniques that look professional

Four field-tested techniques, each shown on real photography. Steal them all.

Close up shot of perfume bottles — Adjust an Image technique
Faces beat objects. Human faces pull the eye first — lead with people when the message allows it. Make it part of your Adjust an Image routine.
Clean sheets of white paper scattered on surface — Adjust an Image technique
Bleed the photo, box the text. Full-bleed imagery feels cinematic; contained text blocks feel deliberate — the contrast is the design. Inside Adjust an Image, this single habit pays off fast.
A messy water color palette in plastic container — Adjust an Image technique
Grade for unity, not for drama. A consistent grade across all photos makes a set feel art-directed instead of assembled. Your Adjust an Image work will show the difference immediately.
Brunette posing in traditional jewelry — Adjust an Image technique
Backgrounds should disappear. If anyone notices the background, it failed — demote it until the subject owns the frame. Apply this inside Adjust an Image today — the improvement is instant.
Avoid the traps

Three mistakes to avoid with Adjust an Image

✕

Text touching the edges

Copy crammed against the canvas edge feels accidental. Fix: give every text block breathing room — margins are free.

✕

Five fonts in one design

Every extra typeface dilutes the message. Fix: one family, up to three weights — restraint reads as confidence.

✕

Everything emphasized

Bold, color, size, and underline on the same words cancel each other out. Fix: pick one emphasis per element.

End to end

A complete Adjust an Image workflow

Five moves, start to shipped. This is how the work actually flows.

  1. 1

    Start in the editor

    Open a blank canvas or a template — Adjust an Image works on anything with pixels. The tool never asks you to start over.

  2. 2

    Do the core move

    Run Adjust an Image the way the walkthrough above shows. Get the big decision right before touching details.

  3. 3

    Refine with a second tool

    Pair it with All tools — tools compose, and two simple moves beat one complicated one.

  4. 4

    Check it on a phone

    Most designs are consumed on phones. Preview small, fix what breaks, then continue.

  5. 5

    Export and ship

    Export in the format your destination wants, keep the master design, and move on to the next one.

Good to know

More Adjust an Image answers

What’s the single most useful tip for Adjust an Image?

One-click Auto-enhance applies a balanced grade (brightness +8, contrast +18, saturation +12, warmth +2) — a solid starting point before fine-tuning the sliders.

What do beginners get wrong with Adjust an Image?

Small moves win: most photos look best with brightness and contrast between −15 and +15. Start simple, then layer on complexity once the basics feel automatic.

Is Adjust an Image really free?

Yes — Adjust an Image is free to use in your browser, and your work saves to your account. Premium plans add AI credits, team features, and higher export limits; the tool itself never holds your design hostage.

Visual guides

Every fact, visualized

Ten detailed infographics — every number real, every label earned. Built for Adjust an Image, only on this page.

How Adjust an Image worksThe exact control order, from blank canvas to finisheddesign.1DesignSet design and watch the canvas answer instantly — everycontrol in this tool previews live.2Image layerSet image layer and watch the canvas answer instantly —every control in this tool previews live.3Brightness 0Set brightness 0 and watch the canvas answer instantly —every control in this tool previews live.4Contrast 0Set contrast 0 and watch the canvas answer instantly —every control in this tool previews live.5Saturation 0Set saturation 0 and watch the canvas answer instantly —every control in this tool previews live.6Warmth 0Set warmth 0 and watch the canvas answer instantly —every control in this tool previews live.
Adjust an Image step-by-step workflow
Anatomy of the Adjust an Image workspaceFive regions do all the work — learn them once.ToolbarEvery tool lives here. Pick one andthe canvas listens.CanvasYour design, live. Drag, resize, editdirectly.LayersThe stack your design is built from —top wins.PropertiesFine-tune whatever is selected, rightwhere you work.TemplatesStarting points that are 70% rightbefore you touch them.ExportOne click out as PNG, JPG, PDF, orMP4.
Adjust an Image workspace anatomy
Export formats, decodedPick the format your destination actually wants.PNG — crisp graphicsText, logos, transparency. The default for anything withletterforms.JPG — photosSmall files for photographic images. Never for text-heavygraphics.PDF — print & documentsMulti-page, print-ready, keeps vectors sharp at any size.MP4 — motionAnimated designs and video exports for social and ads.
Adjust an Image export guide: the right format, every time
Which format for which jobA quick matrix — screenshot it.PNGJPGSocial graphics with text✓Photographic posts✓Print flyers✓Video & animation
Which format for Adjust an Image: the quick matrix
Adjust an Image vs doing it manuallyWhat the tool actually saves you.✓Runs entirely in your browserNo install, no updates, no disk space sacrificed.✓Free tier that is a real workspaceNot a trial — the editor, templates, and core tools stayfree.✓Every control previews liveChange a setting and see the result instantly.✓Templates + AI assistance built inStart from 70% done instead of a blank canvas.✓One-click export in every formatPNG, JPG, PDF, MP4 — sized for each placement.
Adjust an Image advantages
Keyboard shortcuts that pay offLearn these once — they work across the whole editor.Ctrl/⌘ + ZUndo. The most-usedshortcut in any creativetool.Ctrl/⌘ + C / VCopy and paste anyelement, across designs.Ctrl/⌘ + DDuplicate the selectionin place.DeleteRemove the selectedelement instantly.Ctrl/⌘ + SSave your design rightnow.+ / −Zoom the canvas in andout.
Shortcuts that speed up Adjust an Image
Contrast rules that keep text readableReal standards, not opinions.4.5 : 1 — body text minimumWCAG AA: regular text needs this contrast against itsbackground.3 : 1 — large text minimumHeadlines 24px+ (or 19px bold+) get a lower bar — still abar.Grayscale testConvert mentally to gray: if the text vanishes, the colorfailed.Scrim rescueA soft dark veil behind white text saves impossiblephotos.
Contrast rules for Adjust an Image text
Mistakes → fixesThe three traps, and the way out of each.✓Everything emphasizedBold, color, size, and underline on the same words canceleach other out. Fix: pick one emphasis per element.✓Centered paragraphsCentering suits headlines; long centered paragraphs tirethe eye. Fix: left-align anything over two lines.✓One design for every placementA square post stretched into a story looks broken. Fix:resize deliberately for each destination.
Adjust an Image mistakes and fixes
Where Adjust an Image earns its keepFour jobs this tool was born for.SocialPosts & storiesSized right,exported sharp,shipped daily.BrandMarketing assetsOn-palette,on-font, everysingle time.DocsPresentationsSlides andone-pagers thatlook designed.PrintFlyers & cardsPDF export keepsevery edge crisp.
Adjust an Image use cases
Quick answersStraight from this page — no digging required.Are these adjustmentsdestructive?No. photoaicompany stores yoursettings as numbers on the imagelayer — the original image isuntouched, and you can change orDo adjustments affect exports?Yes. The renderer applies yourbrightness, contrast, saturation, andwarmth settings when exporting PNG,JPG, and PDF, so the live preview iWhat does warmth do thatsaturation doesn't?Saturation changes color intensityoverall; warmth shifts the colorbalance — positive values add goldenwarmth, negative values cool the im
Adjust an Image quick answers

Live telemetry

ADJUST AN IMAGE — CAPABILITY TELEMETRY

Live counts from this page · hover any bar

0Form controls
0Guided steps
0Pro tips
0Use cases
Breakdownlive
Canvas
Content
Style
Canvas
Content
Style
Cumulative depthlive
Lab controls: 6Lab controls+ Steps: 11+ Steps+ Tips: 16+ Tips+ FAQs: 19+ FAQs+ Use cases: 25+ Use cases

Complete guide

Everything Adjust an Image can do

The full capability picture — features by plan, every control explained, real use cases, and the spec sheet.

Feature availability

Every capability of this tool, and which plan includes it.

CapabilityFreeProBusiness
A design, then choose an image layer from its layer list.✓✓✓
The four sliders snap to that layer's stored values (or 0 for a fresh layer), shown beside each label.✓✓✓
The sliders — the numeric readout updates live so you can note exact values.✓✓✓
Apply adjustments. The live preview re-renders with your changes.✓✓✓
Made a mess? Reset zeroes every slider and applies neutral settings in one click.✓✓✓

Control map — every field, explained

Each control on this page, and what it actually does when you run the tool.

ControlWhat it does
DesignPick a design, then choose an image layer from its layer list.
Image layerPick a design, then choose an image layer from its layer list.
Brightness 0Small moves win: most photos look best with brightness and contrast between −15 and +15.
Contrast 0Small moves win: most photos look best with brightness and contrast between −15 and +15.
Saturation 0Drop saturation to −100 for true black-and-white without leaving the tool.
Warmth 0Warmth shifts the white balance toward golden (+ values) or cooler blue tones (− values) — handy for matching photos to brand colors.

Use it for — Adjust an Image in real work

1

Rescue an underexposed product photo

2

Warm up a cold indoor shot

3

Desaturate for a moody editorial look

4

Punch contrast on flat daylight images

5

Match two photos to the same tone

6

Prep images for print-safe color

Spec sheet

ControlsBrightness, contrast, saturation, warmth
Range−100 to +100 per control
Live previewYes, instant
Non-destructiveRe-adjust anytime
Applies toAny image layer
FreeUnlimited

Keyboard reference

KeysActionScope
Ctrl/⌘ + ZUndo the last changeBrowser-standard
Ctrl/⌘ + Shift + ZRedoBrowser-standard
Tab / Shift+TabMove between fields in orderBrowser-standard
EnterActivate the focused buttonBrowser-standard
EscClose dialogs and menusBrowser-standard
DeleteRemove the selected layer on canvasEditor